Job Sheet-24M6560D_F20_250305.x_

Path : D:\SeJong\model\2025\A-Tech\24M6560D_SU\250310\20\20-1\ Geometry : 24M6560D_F20_250305.x_t.wnc P/G : M031202Mar10.htm
X_Min : -814.001,          X_Set_A :   -819.001 Y_Max : 385.000,          Y_Set_A :   390.000 Z_Max : 503.000
X_Max : 814.001,          X_Set_A :   819.001 Y_Min : -385.000,          Y_Set_A :   -390.000 Z_Min : -0.001
X_Center : 0.000 Y_Center : 0.000
X_Length 1628.00 Y_Length 770.00 Z_Length 503.00

images/basepart.png

..
===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : -0.00 
---MC1202-24M6560D_F20_250305.x_Mar10.jpg---- , Programmer's Comment : 10H, 범퍼 하코아 수정
NCD Toolpath Type T_No Cutter Image D,∮ R_cn Holder Safe Tool Length Zmin
(R_cen) 		Stock Krpm Time
D3 BALL - 10mm
O2101 Planar Finishing 13 ToolpathCutterShape 8.00 B02-BT50_SSF08S_225N-3T-SRS 6.80 389.46 0.10 5.5 00:25
O2102 Planar Finishing 13 ToolpathCutterShape 8.00 B02-BT50_SSF08S_225N-3T-SRS 6.90 389.34 0.02 5.5 00:25
O2103 Planar Finishing 13 ToolpathCutterShape 8.00 B02-BT50_SSF08S_225N-3T-SRS 18.80 448.00 0.10 5.5 00:02
O2104 Planar Finishing 13 ToolpathCutterShape 8.00 B02-BT50_SSF08S_225N-3T-SRS 18.70 447.88 0.02 5.5 00:02
O2105 Planar Finishing 13 ToolpathCutterShape 8.00 B02-BT50_SSF08S_225N-3T-SRS 18.60 447.99 0.10 5.5 00:02
O2106 Planar Finishing 13 ToolpathCutterShape 8.00 B02-BT50_SSF08S_225N-3T-SRS 18.70 447.88 0.02 5.5 00:02
O2107 Contour Remachining 14 ToolpathCutterShape 3.00 R:1.50 Ball-end, B02-BT50_SSF06S_225N-SRS 6.30 390.68 0.03 7.5 00:01
O2108 Contour Remachining 14 ToolpathCutterShape 3.00 R:1.50 Ball-end, B02-BT50_SSF06S_225N-SRS 18.90 448.57 0.03 7.5 00:00
O2109 Contour Remachining 14 ToolpathCutterShape 3.00 R:1.50 Ball-end, B02-BT50_SSF06S_225N-SRS 18.90 448.57 0.03 7.5 00:00
O2110 Z-Level Finishing 15 ToolpathCutterShape 9.98 1.00 R:1.00 Bull-nose, B02-BT50_SSF10S_225N-SRS 51.20 433.00 0.20 5.2 00:04
O2111 Z-Level Finishing 15 ToolpathCutterShape 9.98 1.00 R:1.00 Bull-nose, B02-BT50_SSF10S_225N-SRS 51.20 433.00 0.10 5.2 00:07
O2112 Z-Level Finishing 15 ToolpathCutterShape 9.98 1.00 R:1.00 Bull-nose, B02-BT50_SSF10S_225N-SRS 51.30 433.00 0.03 5.2 00:07
1 2 3 4 5 6 7 8 9 10 11 12, Selected : 205996.11mm Total Time : 01:22
(Each-PP) : 54_G154 ○○ [ S1250-#2 ] ○○ ,   Saved File Name : M03120212Mar10.htm, Save time : 10:03:11 , Saved Counter : 12
---Sort By Tool_NO--- Se Jong Precision Machinery Co. LTD, Tel : 031 666 1325, Fax : 031 666 1327 ---EnLarge Image---