TL-25M3340D_F2301-01_S6.w-1202Jul05.htm

Job Sheet-25M3340D_F2301-01_S6.w

Path : D:\sejong\model\2025\25m3340d\2301-01\2301-01_3\

Geometry : 25M3340D_F2301-01_250609.x_t.wnc

P/G : M041202Jul05.htm


X_Min : -202.500, X_Set_A : -207.500	Y_Max : 85.000, Y_Set_A : 90.000	Z_Max : 67.151
X_Max : 202.500, X_Set_A : 207.500	Y_Min : -85.000, Y_Set_A : -90.000	Z_Min : 0.000
X_Center : -0.000	Y_Center : 0.000
X_Length 405.00	Y_Length 170.00	Z_Length 67.15

images/basepart.png

..

===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : 0.00

	No.						Krpm	Feed Rate	Approach Rate	Z-Step	Angle A,B,C
5	49	5	Bull-nose D 17.00 r 2.00	17.00	2.00	$images\outil49.tool.png$	2.6	2500	2500	0.25
12	50	12	Bull-nose D 17.00 r 1.00	17.00	1.00	$images\outil50.tool.png$	4.0	2300	2500	0.35
12	51	12	Bull-nose D 16.98 r 1.00	16.98	1.00	$images\outil51.tool.png$	4.0	2300	2500	0.35
13	52	13	Bull-nose D 16.96 r 1.00	16.96	1.00	$images\outil52.tool.png$	4.2	2500	2500	0.35
14	39	14	Ball-end D 6.00	6.00		$images\outil39.tool.png$	6.5	2000	2000
15	40, 45	15	Ball-end D 3.00	3.00		$images\outil40.tool.png$	7.5	1800	2000
16	41	16	Ball-end D 2.00	2.00		$images\outil41.tool.png$	7.9	1200	1500
17	42	17	Ball-end D 1.00	1.00		$images\outil42.tool.png$	7.9	800	1200
18	43	18	Bull-nose D 3.00 r 0.20	3.00	0.20	$images\outil43.tool.png$	7.0	1800	2000	0.07
18	44	18	Bull-nose D 3.00 r 0.20	3.00	0.20	$images\outil44.tool.png$	7.0	1800	2000
19	46	19	Bull-nose D 6.00 r 0.20	6.00	0.20	$images\outil46.tool.png$	6.5	400	500	0.50
19	47	19	Bull-nose D 6.00 r 0.20	6.00	0.20	$images\outil47.tool.png$	6.5	2200	2200	0.12
20	48	20	Bull-nose D 4.00 r 0.20	4.00	0.20	$images\outil48.tool.png$	6.5	2000	2000	0.08
WorkNC Tool List: 5, 12, 13, 14, 15, 16, 17, 18, 19, 20
Same tool number with different values.