TL-25m3340d_F2301-02_S3.w-1202Jul05.htm

Job Sheet-25m3340d_F2301-02_S3.w

Path : D:\sejong\model\2025\25m3340d\2301-02\2301-02_3\

Geometry : 25M3340D_F2301-02_250609.x_t.wnc

P/G : M041202Jul05.htm


X_Min : -237.000, X_Set_A : -242.000	Y_Max : 85.000, Y_Set_A : 90.000	Z_Max : 67.151
X_Max : 237.000, X_Set_A : 242.000	Y_Min : -85.000, Y_Set_A : -90.000	Z_Min : 0.000
X_Center : 0.000	Y_Center : 0.000
X_Length 474.00	Y_Length 170.00	Z_Length 67.15

images/basepart.png

..

===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : 0.00

	No.						Krpm	Feed Rate	Approach Rate	Z-Step	Angle A,B,C
5	46	5	Bull-nose D 17.00 r 2.00	17.00	2.00	$images\outil46.tool.png$	2.6	2500	2500	0.25
8	40	8	Ball-end D 6.00	6.00		$images\outil40.tool.png$	6.5	2000	2000
12	47	12	Bull-nose D 17.00 r 1.00	17.00	1.00	$images\outil47.tool.png$	4.0	2300	2500	0.35
12	48	12	Bull-nose D 16.98 r 1.00	16.98	1.00	$images\outil48.tool.png$	4.0	2300	2500	0.35
13	49	13	Bull-nose D 16.96 r 1.00	16.96	1.00	$images\outil49.tool.png$	4.2	2500	2500	0.35
15	41	15	Ball-end D 3.00	3.00		$images\outil41.tool.png$	7.5	1800	2000
16	42	16	Ball-end D 2.00	2.00		$images\outil42.tool.png$	7.9	1200	1500
17	43	17	Ball-end D 1.00	1.00		$images\outil43.tool.png$	7.9	800	1200
18	45	18	Bull-nose D 3.00 r 0.20	3.00	0.20	$images\outil45.tool.png$	7.0	1800	2000
19	44	19	Bull-nose D 6.00 r 0.20	6.00	0.20	$images\outil44.tool.png$	6.5	2200	2200	0.50
19	50	19	Bull-nose D 6.00 r 0.20	6.00	0.20	$images\outil50.tool.png$	6.5	2200	2200	0.12
WorkNC Tool List: 5, 8, 12, 13, 15, 16, 17, 18, 19
Same tool number with different values.